Electric Heating Thermostatic Incubator 50L-600L

XCH Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp. Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-150-250MJS Temp.Range: 10℃～60℃ Temperature Fluctuation: ±2.0℃ Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ

Mold incubator, Temperature Range 0-60℃. Equipped with UV germicidal lamp, you can choose humidification or no humidification (XCH-MJS series is equipped with humidification function). Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH 150-1000MJ Temp.Range: 0℃～60℃ Deviation: ±1.0℃ Capacity: 1000L Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ

LRH Biochemical Incubator & Cooling Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research. LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture. Model: 1000LRH Capacity: 1000L TEMP: 0~60℃ Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃ Uniformity ≤ ±1.5℃ （@25℃） Installed Power: AC220V±10% 50HZ Environmental Temperature: +5~35℃

Biochemical incubator according to the ICH Guideline Q1A Biochemical incubator is mainly designed and manufactured to be used in scientific research, mainly involving environmental protection, sanitation and epidemic prevention, agriculture, livestock and aquatic products, drug testing, cell culture, etc. TEMP:0~60℃ Fluctuation: ±0.5℃ Deviation: ±1.0℃ Capacity: 150L~2000L Ambient temperature: +5 ～ 35℃ Power source: AC 220V±10% 50HZ

The Thermostatic Incubator is used for storing bacteria and biological culture for colleges, universities, medicine, and biological scientific research departments. It is an essential equipment for scientific research laboratories. Model: 9050GHP~9270GHP Environment temperature: +5 ～ 30℃ Temperature Fluctuation ≤ ±0.3℃ Temperature Uniformity ≤ ±0.5℃（@37℃） Timing Range: 1-9999min Power: AC 220V±10% 50HZ Optional: printer or RS485 interface

XCH-TPS Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, which can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 150TPS~500TPS TEMP Range: 15~50℃ Fluctuation: ＜±0.5℃ TEMP Deviation: ＜ ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX  Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

Ultra Low Temperature medical grade freezer inner tank is made of full-mirror stainless steel 304, which is free of pollution sources and easy to clean; it has an alarm system that meets GMP requirements; it has a data acquisition system that meets GMP requirements. It is equipped with a needle printer and U disk storage as standard. It is suitable for stability test and storage of temperature-sensitive drugs. Temp.Range: -15℃～-25℃ Environment temperature: 5~35℃ Fluctuation: ±0.5℃ Deviation: ±2.0℃ Power:AC 220V±10% 50HZ

The High and Low Temperature and Humidity Chamber used for adaptability test of electrical and electronic products, components and materials in storage, transportation and use under high temperature and low temperature test chamber. Model: 100GDB-1000GDB TEMP Range: -40~150℃ Temperature Fluctuation ＜ ±0.5℃ Temperature Deviation ＜ ±2.0℃ Heating Rising Rate: 1 ～ 3℃ /Min Cooling Fall Rate: 0.7 ～1℃ /Min Environment temperature: +5 ～ 35℃ Power: AC220V±10% 50HZ